©2010 Enerdrive Pty Ltd
15
Operation
• Min DC - This menu displays the lowest battery voltage since the last reset.
The voltage shown on the display is averaged each second and is helpful when
troubleshooting or detecting an over-discharge condition.
To reset the Min DC display, press and hold the rotary “SELECT” knob for 5 seconds
while the ‘Min DC’ display is shown. After this value has been reset, the display will
begin monitoring and displaying new ‘minimum’ DC input values. If the Battery
Monitor is not connected or not communicating, the display will show “0.0”.
Figure 5-6, Resetting the Max DC Value
Figure 5-5, Resetting the Min DC Value
• Max DC - This menu displays the highest battery voltage since the last
reset. The voltage shown on the display is averaged each second, this allows
you to check your charging system (battery charger, charge controller, etc.) to
ensure the charging voltage has been attained. This display is also helpful when
troubleshooting or detecting if an over-charge condition has occurred.
To reset the Max DC display, press and hold the rotary “SELECT” knob for 5 seconds
while the ‘Max DC’ display is shown. After this value has been reset, the display will
begin monitoring and displaying new ‘maximum’ DC input values. If the Battery
Monitor is not connected or not communicating, the display will show “0.0”.
