U
SER MANUAL
–
ENERIUM
100/200/300
MS1-7352 ENERIUM100/200/300_ Ed04 User Manual
Page 50 / 86
13.3 Remote Ethernet communication
Proceed as follows:
•
The
Configuration
screen is displayed.
•
Select the line
Remote communication
with the
keys and press OK.
Remote communication
IP Address
000.000.000.000
Subnet mask
255.255.000.000
Gateway
000.000.000.000
Example
Configuring the IP address, the subnet mask and the gateway can also be done remotely and locally via
the optical head using E.SET/E.VIEW software.
We recommend that "Device Installer" software is not used for setting up remote communications with ENERIUM V2
monitors. (An ENERIUM V2 is distinguishable by its accuracy class on the label on its rear face, while a ENERIUM V1 does
not have this).
13.3.1 IP address
When the
Remote communication
screen is displayed, press OK to select
IP address
.
Press OK to select the (address) value to be changed.
Use the
keys to change the highlighted value and
to move the cursor.
Press OK to confirm.
13.3.2 Mask
Select the line
Mask
with the
keys and press OK.
Use the
keys to change the highlighted value and
to move the cursor.
Press OK to confirm.
13.3.3 Gateway
Select the line
Gateway
with the
keys and press OK.
Use the
keys to change the highlighted value and
to move the cursor.
Press OK to confirm.
