U
SER MANUAL
–
ENERIUM
100/200/300
MS1-7352 ENERIUM100/200/300_ Ed04 User Manual
Page 38 / 86
9
E
NERGIES
S
CREEN
This screen displays the menu for selecting the measurements for active reactive and apparent
energies.
9.1 The screens
This section presents each of the screens accessible by selecting the
icon and pressing the OK
key.
9.1.1 Active energy EP+
Displays the readings of the two positive active active energy meters in receiver mode, accumulated
since the ENERIUM was powered up. The total value is equal to the concatenation of the two values.
Active Energy EP+
MWh
231
kWh
457.897
Example: Display of an energy corresponding to
231,457.897 kWh
9.1.2 Active energy EP-
Displays the readings of the two negative active energy meters in receiver mode, accumulated since the
ENERIUM was powered up. The total value is equal to the concatenation of the two values.
The data is read in the same way as described in paragraph 9.1.1. The only difference is the title EP+,
which becomes EP-.
9.1.3 Reactive energy EQ1
Displays the readings of the two positive reactive energy meters in receiver mode (quadrant 1),
accumulated since the ENERIUM was powered up. The total value is equal to the concatenation of the
two values.
Reactive energy EQ1
MVARh
231
kVARh
457.897
Example: Indicates a reading corresponding to 231,457.897 kVARh
9.1.4 Reactive energy EQ2
Displays the readings of the two positive reactive energy meters in receiver mode (quadrant 2),
accumulated since the ENERIUM was powered up. The total value is equal to the concatenation of the
two values, as shown (example):
The data is read in the same way as described in paragraph 9.1.3. The only difference is the title EQ1,
which becomes EQ2.
