U
SER MANUAL
–
ENERIUM
100/200/300
MS1-7352 ENERIUM100/200/300_ Ed04 User Manual
Page 48 / 86
13.2 RS485 communication
Proceed as follows:
•
The
Configuration
screen is displayed.
•
Select the line
Remote communication
with the
keys and press OK.
Remote communication
Protocol
RTU
Slave address
014
Speed (baud)
115200
Parity
No
Stop bits
1
Data bits
8
Response (ms)
0
ASCII timeout(ms)
01000
Example
13.2.1 Protocol
When the
Remote communication
screen is displayed, press OK to select
Protocol
.
Press OK to select the (protocol) value to be changed.
Use the
keys to change the highlighted value and
to move the cursor. The valid protocols
are RTU or ASCII.
Press OK to confirm.
13.2.2 Slave address
When the
Remote communication
screen is displayed, press OKto select
Slave address
.
Press OK to select the (address) value to be changed.
Use the
keys to change the highlighted value and
to move the cursor. Valid addresses are
from 001 to 247 inclusive.
Press OK to confirm.
13.2.3 Speed (baud)
Select the line
Speed (baud)
with the
keys and press OK.
Use the
keys to change the displayed value (transmission speed in baud).
•
The predefined values are
2400
,
4800
,
9600
,
19200
,
38400
and
115200
.
Press OK to confirm.
13.2.4 Parity
Select the line
Parity
with the
keys and press OK.
Use the
keys to change the displayed (parity) value. The predefined values are
No
,
Odd
and
Even
.
Press OK to confirm.
