53
Output Channel
The Output Channel allows you to select which camera number goes to the record output.
This option is composed of OFF, CA, CA, CA3 and CA4. This option is prior to the Output mode option.
If you select the CA in the Output Channel option, only the camera goes to the record output.
To playback the VCR tape which was recorded using this option, select the VCR mode not PB mode.
Use the following steps to set Output Channel option:
Step
Action
1
Press or to move the cursor to Output Channel.
2
Press or to select the desired option.
•
OFF:
The record output is the field switching video.
•
CA1:
The record output is the camera .
•
CA2:
The record output is the camera .
•
CA3:
The record output is the camera 3.
•
CA4:
The record output is the camera 4.
3
Press MENU to go to the previous OSD window.
Spot Output
The Spot output is the auxiliary output of this monitor.
It can be CA, CA, CA3, CA4, VCR or Sequence.
If VCR is selected as the spot output, the spot output and record output are same.
To use the spot output for a quadrant display, select the record output to „VCR” in the Record Output setup menu.
Use the following steps to set spot output:
Step
Action
1
Press or to move the cursor to Spot Output.
2
Press or to select desired output.
•
CA1:
The spot output is the camera .
•
CA2:
The spot output is the camera .
•
CA3:
The spot output is the camera 3.
•
CA4:
The spot output is the camera 4.
•
VCR:
The spot output is the record output. (VCR)
•
Sequence:
The spot output is the Sequencing video of CA, CA, CA3, CA4 and VCR.
3
Press MENU to go to the previous OSD window.
