38
Rear Panel
K
A
B
C D E F G
H
I
J
Part
Label
Function
A
DC IN Socket
Connect the adapter jack to the DC power connector on the back of the monitor.
B
CA - CA4
Four cameras can be connected to the monitor using the BNC connections labeled CA, CA, CA3 and CA4.
Either left or right BNC can be input or output.
The connectors have auto-termination internal switches.
C
S-VIDEO
Connect S-VHS cable to the video output jack of the camera, VCR or DVD.
D
VCR IN/OUT
The BNC VCR connector is used to connect a VCR to the monitor for recording purposes.
The output video can be multiplexed or quadrant video.
E
MAIN OUT
Connect the BNC cable to other monitors if you want to see same main window on other monitors.
It doesn’t support PC and component, S-video, CVBS, Quad, video input.
F
SPOT OUT
SPOT OUT is the auxiliary video output.
It can be CA, CA, CA3, CA4 or QUAD (REC OUTPUT) and also supports the SEQUENCE mode.
G
PC
Connect the 5 pin D-SUB of the video signal cable to the PC video connector on the back of the monitor.
H
COMPONENT
Connect the component video source using the RCA cable (not supplied) from a DVD or other equipments that support the
component video output.
I
AUDIO
Connect RCA audio cables to the audio output jacks of the VCR or DVD.
J
ALARM IN / OUT
TRIGGER INPUT
Connect the alarm input source to alarm input connector and the alarm output connector to other equipments that support
an alarm input function.
Connect VCR’s synchronizing pulse to the TRIGGER INPUT connector on the monitor using wires (not supplied)
K
SPEAKER
VCR playback audio can be monitored from the unit’s internal speaker
