47
Alarm Input
The Alarm Input that is displayed on the screen allows you to change the alarm input options.
Use the following steps to change the Alatm Input option:
Step
Action
1
Press or to move the cursor to Alarm Input.
2
Press or to select the new option.
•
OFF:
The alarm input is ignored.
•
NO:
The unit looks for a short for alarm condition.
•
NC:
The unit looks for an open for alarm condition.
3
Press MENU to go to the previous OSD window.
Latch
This option is used to determine how long the alarm message will display on the screen.
Step
Action
1
Press or to move the cursor to the alarm LATCH option.
2
Press or to select the new option.
•
ON:
The external alarm message disappears on screen after pressing the MENU button.
•
OFF:
The external alarm message remains on screen until alarm event is terminated (Default)..
3
Press MENU to go to the previous OSD window.
Beep Time
The Beep Time option allows you to select the time to sound the beep.
Use the following steps to change this option:
Step
Action
1
Press or to move the cursor to Beep Time.
2
Press or to select the time desired.
Beep Time can be set from 0 to 99 seconds.
3
Press MENU to go to the previous OSD window.
Relay Time
The Relay Time option allows you to select the time to energize the relay.
Use the following steps to change this option:
Step
Action
1
Press or to move the cursor to Relay Time.
2
Press or to select the time desired.
Beep Time can be set from 0 to 99 seconds.
3
Press MENU to go to the previous OSD window.
