5
Replay
Replay is for viewing captured or motion detected image that had been saved in the memory.
The replay window is the latest motion detected POP window when main window is the QUAD mode and is the main window when this monitor is operated in full
screen mode.
This monitor can save up to 60 fields images.
The latest captured image with the saved time and camera number is displayed on the screen when the Replay mode is selected.
The larger number means the older captured image.
If you disconnect the power plug from the monitor, the motion detected images will be cleared.
CA 0/5/004 :03:5 0/60
Use the following steps to replay captured images:
Step
Action
1
Press or to move the cursor to Replay.
2
Press or to display captured or motion detected images.
3
Press MENU to finish the Replay mode.
Step
Action
1
Press or to move the cursor to History.
2
Press or to display the history window.
3
Press MENU to exit from the history window.
History
The History is used to display the COUNT up to 96 alarm events.
The COUNT data includes alarm source, camera number, time and date.
„M” means the alarm was happened by motion detection.
„L” means the alarm was occurred by the loss of the video signal from the camera input.
„C” means the image was captured by pressing the capture button.
History
M CA MM/DD/YYYY HH/MM/SS
L CA MM/DD/YYYY HH/MM/SS
C CA3 MM/DD/YYYY HH/MM/SS
•
•
Use the following steps to display the alarm COUNT for each alarm:
