50
Step
Action
1
Press or to move the cursor to Dwell Time.
2
Press or to select the desired time.
3
Press MENU to go to the previous OSD window.
Quad
Even though the main window is quadruple screen, the motion detection is still processed.
If the system detects the motion in any camera, the main window can be switched from the quadruple screen to the full screen of the specific camera which contained
motion.
To enable main window switching from the quadruple screen to the full screen, select QUAD ON .
Dwell Time
If there is a motion in any camera, the main screen switches to the motion detected camera during the time that was set in the Dwell Time setup menu and then goes
back to the previous camera when the system is operating in the full screen or the sequence mode.
Dwell Time is the time that the motion detected camera remains in the main window when the main window is full screen mode or the sequence mode.
Use the following steps to set the Dwell Time:
Step
Action
1
Press or to move the cursor to QUAD.
2
Press or to select „ON” or „OFF”.
3
Press MENU to go to the previous OSD window.
Covert
CA1
OFF
CA2
OFF
CA3
OFF
CA4
OFF
COVERT
Select Covert „ON” to hide the picture of any cameras.
Use the following steps to set the Covert option.
Step
Action
1
Press or to move the cursor to the desired camera number.
2
Press or to select „ON” or „OFF”.
• ON:
Covert of the selected camera is enabled.
• OFF:
Covert of the selected camera is disabled. (
Default
)
3
Press MENU to go to the previous OSD window.
