![Eneo MMX Instruction Manual Download Page 7](http://html1.mh-extra.com/html/eneo/mmx/mmx_instruction-manual_2408799007.webp)
7
• You can monitor video from cameras connected to the MMX through Loop Out ports of DVRs. You can control DVRs
if Main Outs of the DVRs are connected to the master MMX. Spot MMXs allow you to monitor video from the
maximum 40 cameras and control DVRs on the spot MMX monitors connected to the spot MMXs.
• Video from any cameras is displayed in the main monitor of a master MMX in the user-defined layouts
(max. 6-channel layout), and you can change the layout by using a network keyboard at any time.
• Video from any cameras is displayed on the spot MMX monitors connected to the spot MMXs in the single screen
layout, and you can change the monitoring channel by using a network keyboard at any time.
• Video from cameras of a DVR connected to a MMX is displayed on the quad monitor of the MMX in the quad- or
single-screen layout.
• Video from cameras of a DVR connected to a MMX is displayed on the spot monitor of the MMX in the single-
screen layout.
• Sequence monitoring or event monitoring will be available according to the preset setting on each monitor.
• Refer to
Chapter 4 – Case Installation, 4.3 Enterprise-Sized System (with DVRs)
for details on the installation
and configuration of the enterprise-sized system with DVRs.
Enterprise-Sized System (with DVRs)
Summary of Contents for MMX
Page 1: ...Instruction Manual MMX Network Controlled Video Matrix System...
Page 77: ...77 Appendix 4 Map of Screens Remote Setup...
Page 78: ...78...
Page 79: ...79...