Eneo MMX Instruction Manual Download

Page: 60 / 80

Spot MMX Monitor

Check the cable connection between a master MMX or slave MMXs and spot MMXs if the spot MMX is installed.

•

Number of spot monitors connected to Spot MMX:

Select the number of spot monitors connected to spot

MMXs, and the operator information for each spot monitor is displayed.
•

Master/Slave MMX – Spot MMX Connection:

Displays the cable connection between a master MMX or slave

MMXs (spot output) and spot MMXs (video input). Clicking the

icon displays the connection information on

a web page.

NOTES:
• When connecting a master or slave MMXs to spot MMXs, you should connect them in order of

Master/

Slave MMX – Spot MMX Connection

above. Otherwise, spot MMXs will not work properly.

• The cable connection is to be changed depending on the number of the master and slave MMXs or spot
MMXs.

Summary of Contents for MMX

















































































Search results

Summary of Contents for MMX

Reviews:

Related manuals for MMX

Brands by name

Popular brands

Eneo MMX, Instruction Manual

Search results

Summary of Contents for MMX

Reviews:

Related manuals for MMX

Brands by name

Popular brands