Eneo MMX, Instruction Manual

Page: 59 / 80

59
Spot Monitor
You can configure the screen layout and set up cameras to be displayed sequentially (sequence monitoring) or event
detected video to be displayed (event monitoring) on spot monitors connected to a master MMX and slave MMXs.
The list of spot monitors connected to a master MMX and slave MMXs is displayed, and you can change the screen
layout on each spot monitor.
•
Edit:
Select a spot monitor in the list and click the button. A layout setup screen appears, and a camera list of the
MMX that the spot monitor is connected is displayed in the left of the setup screen. Refer to
Main Monitor –
Main Monitor Setup/Layout
for details on editing the layout.
NOTES:
• The number of spot monitor layouts displayed in the list changes depending on the number of a master
MMX and slave MMXs. You can set up only one layout for each spot monitor.
• You can register only one group for either of the sequence monitoring and event monitoring when
registering a sequence or event monitoring group.