63
sent to this address will be forwarded to the port only. Also become MAC address binding.
Static MAC address table is designed to limit the movement of the computer, all the
computer's MAC and port binding, this computer moved to other ports can not
communicate, and other computers to move to this interface can still communicate. And
the corresponding "port security", port security is designed to protect the port security, the
port can only be specified in the MAC and its connection when the data is forwarded,
assuming that the port is set up and a MAC binding, then the PC received Other ports can
be communicated, but other PC received this port can not communicate. This function is
the "802.1x authentication" described earlier.
Enter the [Network Security] - [Static Address Lock] menu bar, in the static address latch
page, you can enable / disable static address latch, port learning function port range,
enable / disable learning ability and set the MAC to be locked Address, VLAN ID and port
number, click <Configure> button to add the settings, click <Undo> button to delete the
settings, click the <Save> button at the bottom of the page to save the configuration.
The interface item is described as follows:
Interface Item
Description
Static Address
Lock
Select to enable / disable the static address lock
function.
Note: The following parameter settings can be set
only after the static address lock function is enabled.
Port Range
Need to set the port range.
