35
Table page, you can query the MAC address table of the switch according to different query
conditions. As shown below:
The interface items are as follows:
Interface item
description
Query by physical port
Query by physical port, the specified physical
port range is 1 ~ 26. You can enter one or a
group of ports. If you set a port, enter the
corresponding port number in the port
range; if you set a group of ports, you can
use "," or "-" separated.
"," Used to set a group of non-contiguous
ports, such as 1,3,5.
"-" is used to set a group of contiguous
ports, such as 1-8.
Query by MAC Address Type
Query by MAC address type. The available
types are static MAC address, dynamic MAC
address, and filtered MAC address.
The query
shows the relevant MAC information you are
looking for.
