12
the another side with external AC power socket;
(2)Turn on the power ,check if switch's AC power LED is on, that means power connected
correctly;
(3)Use the power plug snap to jammed the AC Power cable.
3 Function Configuration Guide
3.1
Computer Requirements
Make sure the management PC has already been installed with Ethernet adapter;
Use network cable connect Ethernet ports with network card of PC(Except the
console port.
3.2
Set Up Network Connection
Instruction
(1) You need to set the IP of the PC and the switch in the same network segment. The
default IP address of the switch is 192.168.1.200, network gate is 255.255.255.0.
(2) The port to connect management PC for Web setting must be management VLAN. By
default, management VLAN is VLAN 1,and each port of the switch is VLAN1.
(3) If you need to connect the remote network, please make sure the management PC and
