32
33
Motion Detector Event Action (Alarm Out) Setup Screen
The DVR can be set to react to motion events differently by activating an internal buzzer or external alarms.
Motion Detector Event Action (Alarm Out) setup screen
Highlight the
Sched
box and press the
button. A schedule screen appears. Set the schedule as described earlier.
Highlight the
Alarm Out
box and either Beep or the
alarm output
terminal that you want to associate with the motion event.
Highlight the
Dwell Time
box and set the length of time you want the output activated.
Motion Detector Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site when certain motion events are activated.
Motion Detector Event Action (Notify) setup screen
Highlight the
Sched
box and press the
button. A schedule screen appears. Set the schedule as described earlier.
Highlight the
Notify
box and press the
button. This toggles between
On
and
Off
. When it is On, the DVR notifies the remote site when certain events
occur based on a defined schedule.
NOTE: For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).