18
19
Highlight the
S.M.A.R.T. Setup
and press the
button. The
S.M.A.R.T. Setup
screen appears.
NOTE: If no hard disk drives are installed in the DVR, the
S.M.A.R.T. Setup...
button will be disabled.
S.M.A.R.T. Setup screen
Your DVR shows the conditions of Hard Disk Drives when the installed IDE hard disk drives support S.M.A.R.T. (Self-Monitoring, Analysis and Reporting
Technology) Monitoring program. Highlight the box beside Use. Press the
button to toggle between
On
and
Off
.
The
Last-check
field shows the date and time information of the last storage check.
Highlight the box beside
Period
, and select from
Daily, Weekly
or
Monthly
for the checking period.
NOTE: When selecting
Weekly
and
Monthly
, the
Day of Week
and
Day of Month
field will be activated under the Period field.
Select the check day or check date.
Highlight the box beside
Check Time
, and adjust the numbers using arrow buttons.
Highlight the box beside
Temperature Threshold
and adjust the numbers using arrow buttons.
Highlight the box beside
Sensor Unit
and select from
Celsius
or
Fahrenheit
.
If you want to check the storage status instantly, highlight
Check Now
and press the
button.
You can save your changes by highlighting
OK
and pressing the
button. Selecting
Cancel
exits the screen without saving the changes.
System Log Screen
Highlight
System Log
in the Main menu and press the
button. The
System Log
screen appears.
System Log screen
The System Log screen displays a record of various events logged by the DVR. The list shows the dates and times the system was turned ON and OFF, system
was restarted, recording was started or stopped, playback was started or stopped, setup changes were made, and data banks were cleared.
The events are listed from the most recent to the oldest. You can scroll through the list a page at a time by selecting the Up and Down arrow buttons and
pressing the
button. You can go directly to an event number by highlighting the
Event number
box (left of the UP arrow), pressing the
button,
using the arrow buttons to change the number, and pressing the
button.