Eneo DLR2-04N/160, Operating Instructions Manual, Page: 12 / 60

12 13
3.2 Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60 seconds to initialize.
3.3 Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as time and date, display language, camera,
audio, remote control, record mode, network and password. Your DVR can be set up using various screens and dialog boxes.
Press the MENU button to enter the setup screens. The Admin Password screen appears.
Enter the password by pressing the appropriate combination of camera number buttons and then the button. The factory default password is 4321 .
There are two Setup screens: Quick Setup and Normal Setup. The factory default is the Quick Setup screen
3.4 Quick Setup Screen
Admin Password screen
The Quick Setup screen allows you to set up the most commonly used features of your DVR. Use the arrow buttons to move through the options. Pressing the
button lets you make your selections.
Highlight the box beside Quick Setup and press the button to toggle between On and Off . If you select Off, you will use the Normal Setup screen to
change the DVR’s settings.
Highlight the first box beside
Recording Speed/Quality , and select recording speeds from as few as 0.5ips to as fast as 30ips (25ips for PAL).
NOTE: The DVR has a maximum recording speed of 30ips per camera; however, the recording speed may not be achieved when averaged over all
cameras.
Highlight the second box beside Recording Speed/Quality , and select from Very High, High, Standard and Low .
Highlight the box beside Audio Recording and select either On or Off .
NOTE: It is the user’s responsibility to determine if local laws and regulations permit recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds for the camera sequence dwell time.
Selecting System Information enters a screen where you can set up system information.
Selecting Storage Check enters a screen where you can check the storage status.
Selecting Camera enters a screen where you can set up camera information.
Selecting Network Setup enters a screen where you can set up network information.
Quick Setup screen