Eneo DLR-2104/1.0TBV, Operating Instructions Manual

Page: 68 / 90

User’s Manual
60
Bookmark
Selecting (Bookmark) in the Search menu adds the current playback point to the bookmark list. See the following
Bookmarks section for details.
Display
 Full Screen: Selecting (Display) → (Full Screen) and choosing the camera number button displays the
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3). Clicking
the left mouse button on the screen again returns to the previous display mode.
 2x2, 1+5, 1+7, 3x3: Selecting (Display) → , , or (2x2, 1+5, 1+7 or 3x3) displays the cameras in
the selected multiview screen mode (2x2, 1+5, 1+7 or 3x3). Selecting each display mode is the same as pressing
the
LAYOUT
button on the remote control or scrolling the mouse wheel up and down when in one of the multiview
formats (i.e., 2x2, 1+5, 1+7 or 3x3).
 Camera OSD, Status OSD: Selecting (Display) → Camera OSD or Status OSD toggles Camera OSD
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or (Previous Group or Next Group) in the Search menu moves to the previous or next page.
Alarm
Selecting (Alarm) in the Search menu resets the DVR’s outputs including the internal buzzer during an alarm.
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting again stops panic recording.
It is the same as pressing the
PANIC
button.
Camera Menu
 Zoom:
Selecting (Camera Menu) →
Zoom
and choosing the camera number zooms the current playback image
of the selected camera on the screen. It is the same as pressing the
ZOOM
button. Selecting Zoom again exits the
Zoom mode.
 Show/Hide Text-In: Selecting (Camera Menu) → Show Text-In or Hide Text-In shows or hides the text-in
data on the screen if the video was recorded with text-in data.
 Edit Group: Selecting (Camera Menu) → Edit Group enters to the Active Cameo mode. It is the same as
pressing and holding the (Play/Pause) button for three seconds or longer in any multiview formats. Refer to
the previous Live Monitoring – Active Cameo Mode section for details.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
Export
 A–B Clip-Copy: Selecting (Export) → A–B Clip-Copy will set the starting point of the video to be clip copied,
and the icon displays at the bottom-left corner of the screen. Selecting A–B Clip-Copy again will set the ending
point of the video to be clip copied and displays the Clip-Copy screen. See the following Clip Copy section for details.
 Clip-Copy: Select (Export) → Clip-Copy , and the Clip-Copy screen appears to allow clip copy setup. See
the following Clip Copy section for details.
 Print: Selecting (Export) → Print allows you to print a selected image. See the following Print section for details.