Step 2
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
2A.
Connect Wire Harnesses (#15 & #18) together.
2B.
Attached UPRIGHT FRAME (B) to MAIN FRAME (A) using:
Two M10x50mm Socket Head Cap Screw (#10)
Two M10 Washer (#7)
Two M10 Nylon Lock Nut (#6)
2C.
Attach the Front Cover (#Q) and Bottle Holder (M) to the MAIN
FRAME (A) using:
Two ST4.2x18mm Pan Head Phillips Screws (#9)
8