Step 4
NOTE:
Some hardware components may be pre-assembled. Nylon lock nuts
not fully screw onto bolts, they must be wrench tighten to fully go on.
4A.
Loosen Pop Pin (#19) by turning counter-clockwise. Insert the Seat
Frame (D) into MAIN FRAME (A) and align the adjustment holes of
the Seat Frame (D) to the Pop Pin (#19) and tighten the Pop Pin (#19)
by turning clockwise
4B.
Attach Seat Pad (#21) to Adjustment Bracket (E) using:
Three M8 Washer (#24)
Three M8 Nylon Lock Nut (#25)
4C.
Attach Adjustment Bracket (E) to Seat Frame (D) using:
One Clamping Plate (#22)
One Spacer (#26)
One Knob (#27)
12
