Step 1
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
1A.
Insert Rear Leg Covers ( N & P) to the Rear Leg (R) .
1B.
Install two Rear Leg End Caps (#20) to the Rear Leg (B) using:
Four M5x10mm Pan Head Phillips Screws (#11)
1C.
Install the adjustable Levelers (#17) onto the Rear Leg (R)
1D.
Insert the Steel Plate (#14) into the U-Bracket of MAIN FRAME (A).
1E.
Install the Rear Leg (B) to the Steel Plate (#14) and U-Bracket of
MAIN FRAME (A) using:
Two M12x25mm Hex Head Bolt (#23)
Two M12 Lock Washer (#28)
Two M12 Washer (#29)
NOTE: A second person is recommended to lift up the rear of MAIN
FRAME (A) for installing the Rear Leg (R).
1F.
Connect Rear Leg Covers ( N & P) using:
Two ST4.2x18mm Pan Head Phillips Screws (#9)
6
