Step 3
NOTE:
Some hardware components may be pre-assembled. Nylon lock
nuts not fully screw onto bolts, they must be wrench tighten to fully
go on.
3A.
Connect Heart Rate Cables (#12) to the Heart Rate Cables (#16).
3B.
Attach Handle Bar (C) to the UPRIGHT FRAME (B) using:
Two M10x50mm Socket Head Cap Screw (#10)
Two M10 Washer (#7)
Two M10 Nylon Lock Nut (#6)
3C.
Attach Handle Covers (K & L) to UPRIGHT FRAME (B) using:
Two ST4.2x18mm Pan Head Phillips Screws (#9)
3D.
Attached L Shape Holder (T) to Console (H) using
two M5x10mm Phillips Head Screw (#11)
3E.
Connect Heart Rate Cables (#69) to the Heart Rate Cables (#72)
3F.
Connect Console Harness (#15) to the Console Harness (#71)
3G.
Attach Console (H) to UPRIGHT FRAME (B) using:
Four M5x10mm Phillips Head Screw (#11)
10