Endress+Hauser Teqwave T, Operating Instructions Manual

Page: 24 / 54

Commissioning Teqwave T
24 Hauser
8 Commissioning
Damage to the touch surface
Sharp objects, electrostatic discharge, water and the use of pens not designed for touch
screens, such as standard pencils, can cause a touch screen malfunction or damage the touch
surface.
‣
Do not use sharp objects to operate the touch screen.
‣
Make sure the touch surface does not come into contact with other devices.
‣
Make sure the touch surface does not come into contact with water.
‣
Only use your finger or a specially designed stylus pen to operate the touch surface.
Damage to the membrane keypad
Sharp objects, excessively high pressure, or water can cause the membrane keypad to mal-
function or damage the keypad.
‣
Do not use sharp objects to operate the touch screen.
‣
Do not exert excessive pressure on the membrane keypad.
8.1 Function check
Perform the post-connection checks before commissioning the device.
• Checklist for "post-connection check"
→  14.
8.2 Charging the battery
The measuring device is powered by a built-in battery. The battery is recharged with the
charger or computer via the USB port.
If connecting to the USB charger: use the USB charger supplied with the device. If using
third-party products: ensure compliance with the charger specifications →  13.
If connecting to the computer: the measuring device cannot perform any measurements
during this time.
Charging the battery
‣
Connect the measuring device with the computer (switched on) or the USB charger via
the USB cable.
 The battery symbol flashes while the measuring device is charging.
If the battery symbol does not flash, the battery is already fully charged or the charging
temperature is outside the permitted range →  13.
8.3 Switching on the measuring device
‣
Once the battery has been charged successfully, switch on the measuring device with the
On/Off button.
 The local display of the measuring device starts booting.
If an error message or nothing appears on the local display, perform Diagnostics and
troubleshooting →  40.
NOTICE
NOTICE