Operating options
Teqwave T
16
Hauser
Measurement point
The operating tool allows users to create measurement points, organize the measurement
points into groups and subgroups and load them to the measuring device.
7.2.2
Measurement display area
The Measuring condition screen and the Measurement result or Error message screen
appears on the local display during a measurement.
Measuring condition screen
A0035640-EN
Fig. 4:
Example: automatic measuring condition check
1
Test criterion
2
Indicator: signals whether value of test measurements is within or outside measuring range limits
3
Indicates progress of test measurement
4
Test status indicator: condition satisfied, condition not satisfied, criterion not yet tested
Measurement result screen
A0035641-EN
Fig. 5: Measurement
result
1
Name of the measurement point
2
Name of the measured concentration
3
Graphic representation of the measured value with tolerance limits
4
Measured concentration, averaged over the last 10 seconds
5
Measured temperature, averaged over the last 10 seconds
1
4
2
3
2
5
4
3
1
Summary of Contents for Teqwave T
Page 54: ...www addresses endress com ...
