Endress+Hauser Teqwave T, Operating Instructions Manual

Page: 17 / 54

Teqwave T Operating options
Hauser 17
Graphic measured value representation
With the graphic representation of the measured values, the measuring device presents the
measured values in relation to the limit values. The configured limit values can be viewed
with the operating tool →  30.
Error message screen
A0035644-EN
Fig. 6: Error screen
1 Description of the problem and possible causes. Overview of all error messages →  40
7.2.3 Information area/help text
The local display displays "Help" for every screen. This help describes the next step and helps
users to perform a measurement and analyze the measurement results.
7.2.4 Operating keys
Display Description
Green area
Measured value is within the valid range.
Yellow or red area
Measured value is outside the valid range. The measuring device can provide
a dosage recommendation for a concentration app that only displays one
concentration value if the function is enabled for the corresponding measure-
ment point.
1
1
Key Meaning
On/Off button
• Press the button briefly to switch the device on/off.
• Press the button for longer to reset the device.
Confirm key
Confirm actions.
Back/repeat key
Go back one step or repeat the measurement.
RFID key (without a function)
I
RFID