Endress+Hauser Teqwave T, Operating Instructions Manual

Page: 28 / 54

Commissioning Teqwave T
28 Hauser
8.5.4 Organize measurement points
With the Organize function, it is possible to group several measurement points into a mea-
surement point group, to delete measurement points from the measuring device and to add
available measurement points to the measuring device.
All the measurement points and measurement point groups are displayed in alphabeti-
cal order.
Structure of the "Organize measurement points" window
A0035684-EN
Fig. 11: Example: "Organize measurement points" window
1 Measuring device serial number
2 Measurement points available in the working directory
3 Measurement points added to the measuring device
4 Function buttons
5 Transfer the measurement point organization to the measuring device
6 Save the measurement point organization in the Configuration manager →  30
Unit dosing quantity Select the unit for the dosing recommen-
dation. • l
• kg l
Bulk density in kg/m
3
If the measured variable is a solid, enter
the bulk density of the measured varia-
ble. If the measured variable is a liquid,
enter the value 0 . In this case, the
measuring device uses the density of the
concentration app.
Positive integer 0 kg/m
3
Target value [ concentration 1 ] in % Enter the target value of the concentra-
tion. Positive decimal Mean of the measurement range
that is specified in the concentra-
tion app.
Measurement ranges [ concentra-
tion 1 ] in %
Define limit values for which the measu-
ring device displays a dosing recommen-
dation if the limits are exceeded or
undershot. There are two types of limit in
the measuring device. These are dis-
played as a yellow range or red range.
Positive decimal Depends on the measuring range
that is specified in the concentra-
tion app.
Parameter Procedure Selection/input Factory setting
3
1
2
4
6
5