Operation
Teqwave T
38
Hauser
Creating the report
Prerequisites
• A measurement point with measured data is selected
1. Select the menu "Report"
→
"Create".
The "Settings report generation" window appears.
2. Specify the timeline for report generation. The following options are available:
– Select the start and end date for the report from the drop-down menu.
– Select the check box "Use all available data for the report" to output all the available
measured values as a PDF file.
3. Click "Next" to confirm the time settings.
The "Select location for report" window appears.
4. Select the location where the report is to be stored and click "Save" to save the report.
If the "Open PDF" check box was selected under "Report"
→
"Settings", the standard PDF
viewer displays the report automatically.
9.6
Loading measured values in the operating tool
The operating tool allows users to retrieve measured data saved earlier with the
Open data
function.
Loading the data
1. Select the menu "File"
→
"Load data".
The "Select file" window appears.
2. Select the desired .csv file (measurement point) and click "Load data" to confirm.
The name of the file appears under "Measurement point".
The operating tool displays the measured data of the selected measurement point
file.
9.7
Updating the firmware
Firmware updates can be installed with and without an operating tool. The updates are
available in the Download Area of the Hauser web site: www.endress.com
→
Down-
loads.
Specify the following details:
• Search area: "Software"
• Software type: "Device driver" and "Firmware Flash File"
9.7.1
Updating the firmware without an operating tool
Damage to the transmitter
Disconnecting the transmitter from the power supply or the computer during the update
process can damage the transmitter.
‣
Do not disconnect the transmitter from the computer.
‣
Make sure the battery is fully charged before starting the update.
1. Connect the transmitter to the computer (switched on) via the USB cable.
2. Start the transmitter by pressing the On/Off button.
The computer recognizes the transmitter as a USB mass storage medium.
3. Double-click the USB mass storage medium on the computer to open it.
4. Copy the .lcu file to the "Updates" folder.
NOTICE
Summary of Contents for Teqwave T
Page 54: ...www addresses endress com ...
