Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 48 / 134

Commissioning Proline t-mass A 150 HART
48 Hauser
10 Commissioning
10.1 Function check
Before commissioning the device, make sure that the post-installation and post-
connection checks have been performed.
• "Post-mounting check" checklist →  21
• "Post-connection check" checklist →  26
10.2 Switching on the measuring device
After a successful function check, switch on the measuring device.
After a successful startup, the local display switches automatically from the startup display
to the measured value display.
If nothing appears on the local display or a diagnostic message is displayed, refer to
the section on "Diagnostics and troubleshooting" →  80.
10.3 Setting the operating language
Factory setting: English or ordered local language
X X X X X X X X X
20.50
Display/operat.
Setup
Main menu 0104-1
Language
English
Español
Français
Language
English
Deutsch
Ã
0104-1
Ã
Español
Français
Language
English
Deutsch
0104-1
Anzeige/Betrieb
Setup
Hauptmenü
Sprache
Deutsch
0104-1
XX XX
A0013996