Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 66 / 134

Commissioning Proline t-mass A 150 HART
66 Hauser
10.5.7 Configuring the low flow cut off
Navigation path
"Setup" menu → "Advanced setup" menu →Low flow cut off
Structure of the submenu
Low flow cut off →
Assign process variable
Switch-on value
Switch-off value
Parameter overview with brief description
Parameter Description Selection/
User entry
Factory setting
Assign process variable Select the process variable
for low flow cut off. • Off
• Mass flow
• Corrected volume flow
• FAD volume flow Off
On-value, low flow cut off Enter the on value for low
flow cut off
Max. 15-digit, positive
floating-point number Nominal size dependent
1 % of calibrated full scale
value
Off value low flow cutoff Enter the off value for low
flow cut off 0 to 100 % 50 %