Endress+Hauser Proline t-mass A 150, Operating Instructions Manual, Page: 87 / 134

Proline t-mass A 150 HART Diagnostics and troubleshooting
Hauser 87
410 Data transfer 1. Check connection.
2. Retry data transfer. F Alarm
*
411 Upload/download 1. Check connection.
2. Retry data transfer. F Alarm *
411 Up-/download active Up-/download active, please wait C Warning *
431 Trim Carry out trim. C Warning *
437 Incompatible
configuration 1. Restart device.
2. Contact service. F Alarm *
437 Incompatible
configuration 1. Transfer data or reset device.
2. Contact service. C Alarm
438 Dataset 1. Check data set file.
2. Check device configuration.
3. Up- and download new
configuration. M Warning *
441 Current output 1. Check process.
2. Check current output settings. S Warning *
442 Frequency output 1. Check process.
2. Check frequency output setting. S Warning *
443 Pulse output 1. Check process.
2. Check pulse output setting. S Warning *
453 Flow override Deactivate flow override. C Warning
*
484 Simulation failsafe
mode Deactivate simulation. C Alarm
485 Simulation process
variable Deactivate simulation. C Warning *
491 Simulation current
output Deactivate simulation. C Warning *
492 Frequency simulation Deactivate simulation. C Warning *
493 Simulation pulse
output Deactivate simulation. C Warning
494 Switch output
simulation Deactivate simulation. C Warning
* Diagnostic behavior can be changed: Section 12.4 "Adapting the diagnostic behavior"
Diagnosti
c number
Short text Remedy information
Status
signal
from the
factory
Diagnostic behavior
from the factory
Diagnostics for the process
832 Ambient temperature Reduce ambient temperature. S Warning
*
833 Ambient temperature Increase ambient temperature. S Warning *
834 Process temperature Reduce process temperature. S Warning *
835 Process temperature Increase process temperature. S Warning *