Proline t-mass A 150 HART
System integration
Hauser
47
The assignment of the measured variables to the dynamic variables can be modified and
assigned as desired via local operation and the operating tool using the following
parameters:
• Expert → Communication → HART output → Output → Assign PV
• Expert → Communication → HART output → Output → Assign SV
• Expert → Communication → HART output → Output → Assign TV
• Expert → Communication → HART output → Output → Assign QV
The following measured variables can be assigned to the dynamic variables:
Measured variables for PV (primary dynamic variable)
• Mass flow
• Corrected volume flow
• FAD volume flow
• Temperature
Measured variables for SV, TV, QV (secondary, tertiary and quaternary dynamic
variable)
• None
• Mass flow
• Corrected volume flow
• FAD volume flow
• Temperature
• Totalizer
9.3
Other settings
In the
Configuration
submenu, you can configure other settings for the HART protocol
(e.g. Burst mode)
Navigation path
"Expert" menu → Communication → HART output → Configuration
Summary of Contents for Proline t-mass A 150
Page 133: ......
Page 134: ...www addresses endress com...