Endress+Hauser Proline Promass 84, Commissioning Instructions

Page: 39 / 44

Commissioning Instructions for PTB gas approval Proline Promass 84 Functions relevant to custody transfer
Hauser 39
7.31 Basic function

Sensor data

Flow coeff.
7.32 Basic function

Sensor data

Density coeff.
7.33 Supervision

System

Configuration
Function name No. Description Configuration
TEMPERATURE
COEFFICIENT KM 6840 Use this function to display the temperature coefficient
KM.
display only
TEMP. COEFFICIENT KM 2 6841 Use this function to display the temperature coefficient
KM 2.
display only
TEMP. COEFFICIENT KT 6842 Use this function to display the temperature coefficient
KT.
display only
CALIBRATION COEFF. KD 1 6843 Use this function to display the calibration coefficient
KD 1.
display only
CALIBRATION COEFF. KD 2 6844 Use this function to display the calibration coefficient
KD 2.
display only
Function name No. Description Configuration
DENSITY COEFFICIENT C 0 6850 Use this function to display the density coefficient C 0. display only
DENSITY COEFFICIENT C 1 6851 Use this function to display the density coefficient C 1. display only
DENSITY COEFFICIENT C 2 6852 Use this function to display the density coefficient C 2. display only
DENSITY COEFFICIENT C 3 6853 Use this function to display the density coefficient C 3. display only
DENSITY COEFFICIENT C 4 6854 Use this function to display the density coefficient C 4. display only
DENSITY COEFFICIENT C 5 6855 Use this function to display the density coefficient C 5. display only
Function name No. Description Configuration
ASSIGN SYSTEM ERROR 8000 Use this function to display system errors. Options:
e.g. system error list
ERROR CATEGORY 8001 Use this function to determine whether the system error
generates a notice or fault message.
Options: e.g. NOTICE
MESSAGE
ASSIGN PROCESS ERROR 8002 Use this function to display process errors. Options:
e.g. process error list
ERROR CATEGORY 8003 Use this function to determine whether the process
error generates a notice or fault message.
Options: e.g. NOTICE
MESSAGE
ACKNOWLEDGE FAULTS 8004 Use this function to determine whether a fault message
must be acknowledged.
Options:
e.g. ON
ALARM DELAY 8005 Use this function to specify the time period which must
elapse before a notice or fault message is generated.
User input:
e.g. 0 s
STORE PERMANENTLY 8007 Use this function to display the status of the automatic,
permanent storage of parameter changes in the
EEPROM.
Display:
e.g. ON