Endress+Hauser Micropilot M FMR250, Operating Instructions Manual

Page: 32 / 120

Operation Micropilot M FMR250 FOUNDATION Fieldbus
32 Hauser
5.1.1 On-site operation
Options for on-site operation
• Display and operating module
• Hauser operating software "FieldCare"
Parameter access by on-site operation
The following parameters can be accessed by on-site operation:
• Parameters of the device specific blocks (Sensor Block, Diagnostic Block, Display Block)
• Hauser service parameters
• in the Resource Block: "Device Tag", "Device ID", "Device Revision", "DD Revision" (read only)
L00-FMU4XXXX-02-00-00-YY-005
The highlighted parameters can be edited by on-site operation.
5.1.2 Remote operation
Options for remote operation
• FOUNDATION Fieldbus configuration tool (e.g. DeltaV or ControlCare)
• Field Communicator 375, 475
Parameter access by remote operation
The following parameters can be accessed by remote operation:
• Parameters of the device specific blocks (Sensor Block, Diagnostic Block, Display Block)
• Parameters of the FOUNDATION Fieldbus function blocks
L00-FMU4XXXX-02-00-00-YY-006
The highlighted parameters can be edited by remote operation.
Ha u ser
Ser v ice- P arameter
Sensorbloc k
Dia g nosebloc k
Displa y - B loc k
Reso u rce B loc k
AI- B loc k 1
AI- B loc k 2
P ID B loc k
Arit h meti k - B loc k
Inp u t-Selector- B loc k
Si g nal-C h aract.- B loc k
Inte g rator- B loc k
Ha u ser
Ser v ice- P arameter
Sensorbloc k
Dia g nosebloc k
Displa y - B loc k
Reso u rce B loc k
AI- B loc k 1
AI- B loc k 2
P ID B loc k
Arit h meti k - B loc k
Inp u t-Selector- B loc k
Si g nal-C h aract.- B loc k
Inte g rator- B loc k