Endress+Hauser Micropilot FMR62 Technical Information Download Page 68

Page: 68 / 88

Micropilot FMR62

V. 4, Rev. 2, 19-03-2018

Hauser

Feature 100 in the product structure

Process connection

TFK

Tri-Clamp ISO2852 DN70-76.1 (3"), PTFE>316L

THK

Tri-Clamp ISO2852 DN101.6 (4"), PTFE>316L

The CRN certificate applies in a limited pressure range; see the following table.

• Process connections that do not have CRN approval are not listed in this table.

• Please refer to the product structure to discover which process connections are available for a

specific device type.

• CRN-approved devices bear the registration number (tbd.) on the nameplate.
An additional pressure restriction applies for the device versions listed in the table below if they

are CRN-approved. The pressure range indicated in the "Process" section →  39 continues to

apply for device versions not listed in the table below (in preparation).

Summary of Contents for Micropilot FMR62

























































































Search results

Summary of Contents for Micropilot FMR62

Reviews:

Related manuals for Micropilot FMR62

Brands by name

Popular brands

Endress+Hauser Micropilot FMR62, Technical Information

Search results

Summary of Contents for Micropilot FMR62

Reviews:

Related manuals for Micropilot FMR62

Brands by name

Popular brands