Micropilot FMR62
Hauser
V. 4, Rev. 2, 19-03-2018
39
Process
Process temperature, process
pressure
The pressure ranges indicated can be reduced by the choice of process connection. The nominal
pressure (PN) indicated on the nameplate refers to a reference temperature of 20 °C, and of
100 °F for ASME flanges. Observe pressure-temperature dependency.
Please refer to the following standards for the pressure values permitted at higher
temperatures:
• EN 1092-1: 2001 Tab. 18
In terms of their stability-temperature property, the materials 1.4435 and 1.4404 are
grouped in EN 1092-1 table 18 under 13E0. The chemical composition of the two materials
can be identical.
• ASME B 16.5a – 1998 Tab. 2-2.2 F316
• ASME B 16.5a – 1998 Tab. 2.3.8 N10276
• JIS B 2220
FMR62, integrated antenna, PEEK, 150 °C (302 °F)
p
-40
(-40)
-20
(-4)
+150
(+302)
0
(+32)
T
p
[°C]
([°F])
1
2
[bar] ([psi])
20 (290)
-1 (-14.5)
0 (0)
A0032182
10
FMR62: Permitted range for process temperature and process pressure, integrated antenna, PEEK (feature
070: GE, GF), 150 °C (302 °F)
1
Feature 90, seal: A5, FKM Viton GLT
2
Feature 90, seal: C1, FFKM Kalrez
FMR62, integrated antenna, PEEK, feature 070: GE, GF
Feature 100 "Process connection" Feature 90
"Seal"
Process temperature
range
Process pressure range
• GDJ:
Thread ISO228 G3/4, 316L
• GGJ:
Thread ISO228 G1-1/2, 316L
• RDJ:
Thread ANSI MNPT3/4, 316L
• RGJ:
Thread ANSI MNPT1-1/2, 316L
A5:
FKM Viton GLT
–40 to +150 °C
(–40 to +302 °F)
p
rel
=
–1 to 20 bar
(–14.5 to 290 psi)
C1:
FFKM Kalrez
–20 to +150 °C
(–4 to +302 °F)
1)
The pressure range may be further restricted in the event of a CRN approval
