background image

Accessories

Memosens COS51E

40

Hauser

Memosens data cable CYK11

• Extension cable for digital sensors with Memosens protocol

• Product Configurator on the product page: 

www.endress.com/cyk11

Technical Information TI00118C

11.1.3   Cleaning

Compressed air cleaning for COSXX

• Connection: OD 6/8 mm (incl. reduction hose coupling) or OD 6.35 mm (¼")

• Materials: POM/V4A

• Order No.

• AD 6/8 mm: 71110801

• AD 6.35 mm (¼"): 71110802

Compressor

• For compressed air cleaning

• Order No.

• 230 V AC order no. 71072583

• 115 V AC order no. 71194623

Spray cleaning for CYA112 assembly

Order No.

• Assembly length 600 mm (23.62 in): 71158245

• Assembly length 1

 

200 mm (47.42 in): 71158246

Chemoclean CYR10B

• Cleaning injector for spray cleaning and retractable assemblies

• Product Configurator on the product page: 

www.endress.com/CYR10B

Technical Information TI01531C

11.1.4   Transmitter

Liquiline CM44

• Modular multi-channel transmitter for hazardous and non-hazardous areas

• HART®, PROFIBUS, Modbus or EtherNet/IP is possible

• Order according to product structure

Technical Information TI00444C

Liquiline CM42

• Modular two-wire transmitter for hazardous and non-hazardous areas

• HART®, PROFIBUS or FOUNDATION Fieldbus is possible

• Order according to product structure

Technical Information TI00381C

Liquiline Mobile CML18

• Multiparameter mobile device for laboratory and field

• Reliable transmitter with display and app connection

• Product Configurator on the product page: 

www.endress.com/CML18

Operating Instructions BA02002C

Liquiline Compact CM82

• Configurable 1-channel multiparameter transmitter for Memosens sensors

• Ex- and non-ex applications possible in all industries

• Product Configurator on the product page: 

www.endress.com/CM82

Technical Information TI01397C

Summary of Contents for Memosens COS51E

















































Reviews: