Endress+Hauser Memosens COS51E, Operating Instructions Manual

Page: 18 / 48

Mounting Memosens COS51E
18 Hauser
Basin rim mounting with immersion tube
1 2
3
4
5
A0042860
 11 Basin rim mounting
1 Pendulum holder CYH112
2 Assembly Flexdip CYA112
3 Assembly float
4 Oxygen sensor
5 Basin rim
Float
The CYA112 float is for use in the case of large fluctuations in water level, for example in
rivers or lakes.
1
2
3
4
5
6
7
G1
800 (31.50)
500 (19.69)
220 (8.66)
Ø200 (7.87)
A0032159
 12 Dimensions in mm (inch)
1 Cable run with strain relief and rain shield
2 Fixing ring for rope and chains with terminal screw
3 Eyelets Ø15, 3 x 120 ° for anchoring
4 Plastic float, resistant to salt water
5 Pipe 40 x 1, stainless steel 1.4571
6 Bumper and ballast
7 Oxygen sensor
5.3.3 Flow assembly COA250
The COA250 flow assembly with automatic self-venting is suitable for use in pipelines or
at hose connections. The inlet is at the bottom of the assembly and the outlet is at the top
(G¾ connection thread). It is installed in a pipe using two 90° pipe brackets at the inlet of
assembly (item 6).