Endress+Hauser HART Proline Promass 83, Operating Instructions Manual

Page: 86 / 148

Accessories Proline Promass 83
86 Hauser
8.3 Communication-specific accessories
8.4 Service-specific accessories
Accessory Description Order code
HART Communicator
Field Xpert handheld
terminal Handheld terminal for remote parameterization and for
obtaining measured values via the current output HART
(4 to 20 mA).
Contact your EHauser representative for more
information.
SFX100 - *******
FXA195 The Commubox FXA195 connects intrinsically safe smart
transmitters with the HART protocol with the USB port of
a personal computer. This enables remote operation of
the transmitter with operating software (e.g. FieldCare).
Power is supplied to the Commubox via the USB port. FXA195 - *
Accessory Description Order code
Applicator Software for selecting and sizing Hauser
measuring devices:
• Calculation of all the necessary data for identifying the
optimum flowmeter: e.g. nominal diameter, pressure
loss, accuracy or process connections
• Graphic illustration of the calculation results
Administration, documentation and access to all project-
related data and parameters over the entire life cycle of a
project.
Applicator is available:
• Via the Internet:
https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
DXA80 – *
W@M Life cycle management for your plant
W@M supports you with a wide range of software
applications over the entire process: from planning and
procurement, to the installation, commissioning and
operation of the measuring devices. All the relevant device
information, such as the device status, spare parts and
device-specific documentation, is available for every device
over the entire life cycle.
The application already contains the data of your
Hauser device. Hauser also takes care of
maintaining and updating the data records.
W@M is available:
• Via the Internet:
www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation.
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software
package, test results can be imported into a database,
printed and used for official certification.
Contact your Hauser representative for more
information. 50098801
FieldCare FieldCare is Hauser’s FDT-based plant asset
management tool and allows the configuration and
diagnosis of intelligent field devices. By using status
information, you also have a simple but effective tool for
monitoring devices. The Proline flowmeters are accessed
via a service interface or via the service interface FXA193.
→
Product page on the
Hauser website:
www.endress.com
FXA193 Service interface from the measuring device to the PC for
operation via FieldCare. FXA193 – *