Endress+Hauser Fieldgate FXA42 Page 60 Operating Instructions Manual Download

Page: 60 / 118

Operation

Fieldgate FXA42

Hauser

The following tabs may be available in the device, depending on the particular device

version:

• Event log

• Login

• Variables

• Network

• Cellular modem

• Modbus client/master

• Modbus server/slave

• Analog inputs

• Digital inputs

• Data transfer

• Messages

• Time

• SMS I/O

• OpenVPN

• DHCP Server

• NAT

• Firewall

• Update

• Export

Functions

Due to the many features and communication protocols that are available on the device,

significant response time latencies (particularly if communicating via the cellular modem)

and CPU overload may occur if the functions and communication protocols are used

extensively.

8.4.1

Event log

The event log is the central point where all the components of the Fieldgate FXA42

firmware store their event messages.
Each event message consists of the message text, a time stamp and an event type.
Click a message text to open the help and to display more detailed information about the

message.
Time stamps are saved in the time zone that is selected in the Fieldgate FXA42. The time

zone currently selected can be either the local time zone that is saved or the time zone

provided by the FIS connection if it is enabled.

The system clock of the Fieldgate FXA42 might not be synchronized. In this case, the

time stamps are not displayed correctly.

Summary of Contents for Fieldgate FXA42























































































































Search results

Summary of Contents for Fieldgate FXA42

Reviews:

Related manuals for Fieldgate FXA42

Brands by name

Popular brands

Endress+Hauser Fieldgate FXA42, Operating Instructions Manual

Search results

Summary of Contents for Fieldgate FXA42

Reviews:

Related manuals for Fieldgate FXA42

Brands by name

Popular brands