Endress+Hauser Fieldgate FXA42, Operating Instructions Manual

Page: 94 / 118

Operation Fieldgate FXA42
94 Hauser
Discover message received, CI=<x>, MAC=<y>
A DHCP discover message was received from a client. The message also shows the client
identifier as a hex string and the client's MAC address.
Request message received, CI=<x>, MAC=<y>
A DHCP request message was received from a client. The message also shows the client
identifier as a hex string and the client's MAC address.
Leased IP=<x>, Leasing Time=<y>, Index=<z>
The IP address indicated has been leased to the client. The message also shows the leasing
time in seconds and the internal leasing table index.
Release message received, CI=<x>, MAC=<y>
A DHCP release message was received from a client. The message also shows the client
identifier as a hex string and the client's MAC address.
Release IP=<x>, Index=<y>
The IP address indicated has been released. The message also shows the internal leasing
table index.
Network interface not configured
The network interface that the DHCP server is to use does not have a valid IP
configuration.
Failed to send response message, error <x>
A DHCP response message could not be sent. The message also shows the error code
returned by the TCP/IP stack.
No more client addresses available
A client's request could be not served because all the available addresses are already leased
to or reserved for other clients.
Receive Error <x>
No DHCP message could be received. The message also shows the error code returned by
the TCP/IP stack.
Received malformed message
A malformed DHCP message was received from a client.
No interface found for given IP address
The DHCP server could not find a network interface for the configured IP address at start-
up.
Open socket failed
The DHCP server could not open a UDP socket at start-up.
Bind socket failed
The DHCP server could not bind its UDP socket to the designated port at start-up.
Only <x> clients possible due to netmask setting
The configured netmask allows fewer IP addresses than configured.
Failed to allocate client data structure
The DHCP client failed to allocate memory for its internal leasing table at start-up.
Adding static lease IP=<x> failed, IP address is in use
A static lease could not be added because the IP address indicated is already in use. The
message also shows the IP address of the static lease that should be added.
Adding static lease IP=<x> failed, no free slot