Endress+Hauser Deltabar S FMD77, Operating Instructions Manual

Page: 52 / 114

Operation Deltabar S FMD77, FMD78, PMD75 with FOUNDATION Fieldbus
52 Hauser
6.4.2 Selecting an option
Example: Selecting the "Pressure" measuring mode.
6.4.3 Editing a value
Example: changing the DAMPING VALUE function from 2.0 s to 30.0 s.

ä
37,
Section 6.2.3 "Function of the operating elements – onsite display connected".
Onsite display Operation
MEASURINGMODE_Flow
"Flow" has been selected as the measuring mode. The
option currently active is indicated by a 3in front of the
menu text.
MEASURINGMODE_Press
Use "+" or "–" to select "Pressure" as the operating mode.
MEASURINGMODE_Press-1
1. Press "E" to confirm your choice. The option
currently active is indicated by a 3 in front of the
menu text. (The "Pressure" measuring mode is
selected.)
2. Go to the next menu item with "E" .
Onsite display Operation
P01-xxxxxxxx-19-xx-xx-en-023
The onsite display indicates the parameter to be
modified. The value highlighted in black can be
modified. The unit "s" is prespecified and cannot be
changed.
P01-xxxxxxxx-19-xx-xx-en-027
1. Press "+" or "–" to enter the editing mode.
2. The first digit is highlighted in black.
P01-xxxxxxxx-19-xx-xx-en-028
1. Use the "+" key to change the digit "2" to "3".
2. Press the "E" key to confirm "3". The cursor goes to
the next position (highlighted in black).
P01-xxxxxxxx-19-xx-xx-en-029
The decimal point is highlighted in black. This means
you can now edit this digit.