Creating, editing and saving programs
Biometra TAdvanced
60
Version 02_20
7.7
Inserting a step
To insert a step, select a program step on the Biometra TAdvanced spreadsheet or
graphical programming screen and press the [I
NSERT
] button.
I
NSERT
When you press the [I
NSERT
] button, the screen for editing program steps opens (see
section "Editing steps" p. 49). Enter the desired parameters for the new step.
Note
: The new step will be inserted at the selected program step. If, for example, step
3 is selected, the new step will be inserted at position 3. The existing step 3 is not
overwritten; instead step 3 and all the following steps are moved one position higher.
This means the existing step 3 becomes step 4, step 4 becomes step 5 and so on.
Note
: If a new step is inserted in an existing loop, the number of steps within the loop
increases, whereas the number of cycles remains the same.
7.8
Deleting a step
To delete a step, select a program step on the Biometra TAdvanced spreadsheet or
graphical programming screen and press the [D
ELETE
] button.
D
ELETE
Note
: If a step is deleted, all the following steps will be moved one position lower. If,
for example, step 3 is deleted, step 4 will become step 3, step 5 will become step 4 and
so on.
Note
: If a step is deleted in an existing loop, the number of steps within the loop
decreases, whereas the number of cycles remains the same.
7.9
Saving the program
To save a program, press the [D
ONE
] button.
D
ONE
On the Biometra TAdvanced spreadsheet or graphical programming screen. In the next
program overview screen (see Fig. 41), touch the corresponding buttons to select a
user directory and a program storage location.
If the number of user directories or programs is higher than the maximum number
that can be displayed in the list, the buttons above and below the list can be used to
scroll up and down.
Note
: The user directory of the logged in user is automatically preselected.