Commissioning
Condumax CLS15D/16D/21D
20
Hauser
Device condition and specifications
Notes
Are all cable entries mounted, tightened and leak-tight?
For lateral cable entries, make sure the cables
loop downwards to allow water to drip off
Are all cable entries installed downwards or mounted laterally?
6
Commissioning
Before first commissioning, check if:
• the sensor is correctly installed
• the electrical connection is correct.
If using an assembly with automatic cleaning, check that the cleaning medium (e.g. water or
air) is connected correctly.
L
WARNING
Escaping process medium
Risk of injury from high pressure, high temperatures or chemical hazards
‣
Before applying compressed air to an assembly with cleaning facility, make sure the
connections are correctly fitted.
‣
Do not install the assembly in the process if you cannot make the correct connection
reliably.
7
Maintenance
L
CAUTION
Corrosive chemicals
Danger of chemical burns to the eyes and skin. Danger of damage to clothing and equipment
‣
It is absolutely essential to protect the eyes and hands properly when working with acids,
bases and organic solvents!
‣
Wear protective goggles and safety gloves.
‣
Clean away splashes on clothes and other objects to prevent any damage.
‣
Pay particular attention to the information provided in the safety data sheets for the
chemicals used.
L
WARNING
Hydrofluoric acid and mineral acids
Risk of serious or fatal injury from caustic burns
‣
Wear protective goggles to protect your eyes.
‣
Wear protective gloves and appropriate protective clothing.
‣
Avoid all contact with the eyes, mouth and skin.
‣
If using hydrofluoric acid, only use plastic vessels.
