Electrical connection
Condumax CLS15D/16D/21D
16
Hauser
The Dipfit CLA111 immersion assembly is available to install sensors with a G1 thread in
vessels.
A
B
D
A0024145
7
Installation in Dipfit CLA111 immersion assembly, fastening versions A, B and D
Ensure that the electrodes are fully immersed in the medium during measurement.
4.2
Post-installation check
• Are the sensor and cable undamaged?
• Is the sensor installed in the process connection and is not suspended from the cable?
5
Electrical connection
L
WARNING
Device is live
Incorrect connection may result in injury or death
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior
to commencing connection work, ensure that no voltage is present on any cable.
