Installation
Condumax CLS15D/16D/21D
12
Hauser
4
Installation
4.1
Mounting the sensor
4.1.1
CLS15D
The sensors are installed directly via the process connection thread NPT ½" or ¾" or
clamp 1 ½". As an option, the sensor can also be installed using a commercially available T-
piece or cross fitting or using a flow assembly.
NOTICE
Incorrect mounting or disassembly
The Memosens head could become loose and fall off, resulting in total sensor failure
‣
Only mount the sensor via the process connection.
‣
To do so, use a suitable tool, such as an open-ended wrench.
