Endorphin.es ANDREW HUANG GHOST 16hp, Manual, Page: 9 / 19

22.
TAIL CV INPUT JACK:
0…+5V external CV input for the DECAY of
the reverb.
23.
HOLD
/REVERSE*
BUTTON:
primary function holds or freezes the
reverb, allowing you to ‘hold’ a part of audio until you press this button again.
When hold is enabled, this button is fully lit, shown by the symbol under it: .
Secondary function in combination with
ROUTING /* button switches the
algorithm to REVERSE REVERB . When reversed reverb is activated, the
button is semi­lit, shown by the symbol under it:
When REVERSE REVERB is activated, a single HOLD button press along
with FREEZE trigger input activates and deactivates delay freeze
(recirculating delay buffer audio).
24.
FREEZE JACK:
0…+5V external trigger input to enable the HOLD of
the reverb. Has a latch action: each consequent trigger either enables or
disables the freeze.
25.
BPF
/COMB*
BUTTON:
switches the filter type from default STATE­
VARIABLE FILTER LP/HP to BAND­PASS filter and back. When band­pass
filter is enabled, this button is fully lit shown by the symbol under it: .
Secondary function switches to
COMB FILTER with resonator by using the
ROUTING + BPF
/COMB*
button combo. When the COMB FILTER is
activated, the button is semi­lit, shown by the symbol under it: . A second
press on the button switches back to the LP/HP filter (button unlit).
26.
RESONANCE KNOB:
manual control over the RESONANCE OF THE
FILTER ; is summed with the external CV applied to the RESONANCE CV
input jack. When the BAND­PASS filter is selected, this knob defines the
width of the band. In
COMB FILTER mode this knob is bipolar and defines
the feedback adding negative (to CCW) and positive (CW) combs and at
maximum CW/CCW values enables the resonator.
27.
RESONANCE CV INPUT JACK:
0…+5V external CV control for
the RESONANCE of the filter.
28.
/ENV DEPTH* LED:
Brightness shows the internally generated
envelope.. When turned while pressing the ROUTING /* button, this LED
shows the amount of the envelope applied to the internal sidechain audio
ducking effect.
29.
TRIGGER INPUT JACK:
trigger input for the onboard sidechain
envelope.
30.
SIDECHAIN
/ENV DEPTH*
KNOB:
Sets the decay of the onboard
envelope from zero (no envelope) to approx. 5 seconds. When turned while
pressing the
ROUTING /* button, this knob adjusts the depth of the envelope
to the internal sidechain audio ducking effect.