Endorphin.es ANDREW HUANG GHOST 16hp, Manual, Page: 10 / 19

31.
ENVELOPE OUTPUT JACK:
0…+5V envelope output triggered
from TRIG IN jack. The envelope has fixed 1 msec attack and a natural­
sounding exponential curve. While the internal envelope for sidechaining is
negative (to duck the audio) this output provides a positive version of the
envelope to use elsewhere in your system or modulating module’s
parameters.
32.
COMPRESSOR KNOB:
manual control over the amount of
compression applied after the effects processing chain, is summed with an
external CV applied to the
COMPRESSOR CV IN jack.
33.
COMPRESSOR CV IN JACK:
0…+5V external CV input for the
compressor amount.
34.
VOLUME
/DRIVE
KNOB:
controls the final output volume. Acts as an
attenuator for the POST VCA CV jack. When the knob passes after 15
o’clock it adds extra DRIVE saturation to the output signal while trying to
maintain its amplitude.
35.
POST­VCA CV INPUT JACK:
0…+5V external CV input for the
final volume level. Normalled to +5V when no patch cable is inserted.
36.
OUT 1
,
OUT 2 JACKS:
final stereo audio outputs. OUTPUT 1 is
typically left and OUTPUT 2 is typically right. OUTPUTS 1/2 can drive
headphones or be used as separate mono L/R outputs connected with mono
cables. When each jack is used with stereo TRS cables, these outputs can
be used in
PSEUDO­BALANCED CONNECTION for example to your audio
interface directly. Pseudo­balanced connection ensures less noise hum on
the long cables but cuts the audio signal amplitude by half – to approximate
pro­line level +/­2.5V. Both audio inputs and outputs support airline audio
jack adapter (sold separately) to connect a 3.5mm TRS stereo (AUX) cable
directly.
TONE SHAPING
TONE knob enables light tone shaping after initial pre­VCA with a light TILT EQ
leaving more low frequencies at knob’s full CCW position, and leaving more high
frequencies at knob’s full CW position. After that stage, the signal is passed to the
main processing chain. By pressing and holding the
ROUTING button, TONE
/GAIN*
knob acts as a gain booster for the external audio signal from 100% at full CCW to
boosted at full CW.
 REMINDER : when digital gain is increased past 100% it brings digital noise, use
at your own discretion.