P5/8/08
Page 24 of 26
Water Quality System
Filter
"
After 24 hours of filtering following the addition of chlorine, bleed off any air at
the filter and note the pressure on a test log sheet.
"
If the pool has been contaminated with any debris during installation, you may
wish to clean or exchange the cartridge filter at this time.
"
Typically, the cartridge should be removed or replaced when the filter pressure
rises 5 psi above starting pressure.
"
In indoor installations and with little to moderate use, this may only be once
every few months.
"
The filter pressure should be checked every two weeks.
Heater (Optional)
"
It is very important that you read the heater literature before operating the
heater.
"
During the initial 24-hour start-up period, you may turn on your heater to
bring the pool up to your desired temperature.
PLACARDING YOUR FASTLANE POOL
Place the included (8)
no diving into pool/keep children supervised at all times
stickers on all four (4) sides of your pool on the inside and outside top rail area of your
liner, before using the Fastlane Pool.
NO DIVING into the Fastlane Pool.
Please keep children supervised at ALL times!
Endless Pools is an industry leader in customer service.
Should you have any questions about or need assistance with your Fastlane Pool,
please call our Customer Service Department at 1-800-910-2714.