– Page 16 –
To set display to Screen Power save mode
By using
keys, the following screen will appear.
METERING SETUP
LCD POWER SAVE
Disable
If it is desired that the LCD back light is always turned On, select the disable mode by pressing
key and
press
AL.ACK
key to save.
If it is desired to have the back light constantly On, select Enable by press
key and press
AL.ACK
key. This
will set the LCD back light to be set in ON mode.
To set Energy Reset and Clear
By using
keys, the following screen will appear.
METERING SETUP
Energy Reset?
If the meter needs to be reset, press
AL.ACK
enter key, the following screen will appear.
METERING SETUP
ENERGY RESET
DONE
ENTERED
and the previous energy and average PF are reset to Zero.
Note: By doing this, we can see AVG. PF maintained by the panel from the installation.
All other remaining setting are done in the Factory based on the panel rating. Factory setting details in end of startup
procedure.
After completing the setting. Return back from the program mode by pressing
and
keys
simultaneously.
